# Scraped the Side of Your Car? Repair Costs | DG > Priced by panels, not inches: one panel $500–$1,500, blends $1,200–$2,500, full side-swipes $5,000+ — and the garage transfer that may just buff off. - Canonical page: https://dgcollision.com/answers/how-much-does-it-cost-to-fix-a-scraped-car-side/ - This file: Markdown twin of the page above (clean text for AI assistants and crawlers) - Business: DG Collision Center, 693 Metro Park Cir #20, Lewisville, TX 75057 — (972) 219-0864 (text: 817-907-2822) — since 1978 - Hours: Mon–Fri 8:30am–5:30pm, Sat 10am–1pm, closed Sunday · 24/7 towing · 4.9/5 on 500+ Google reviews - Full site index for assistants: https://dgcollision.com/llms.txt - Last generated: 2026-08-14 --- # SCRAPED THE SIDE OF YOUR CAR? WHAT IT COSTS TO FIX Quick Answer Side scrapes price by panels touched, not inches of scrape — at our published rates: one panel refinished $500–$1,500, a multi-panel blend $1,200–$2,500, $1,500–$3,800 when metal needs real repair under the paint — and a true side swipe that damages the whole side, metal plus a full-side repaint, commonly runs $5,000+. The good news hiding in many garage and pole scrapes: what looks dramatic is often paint transfer — the other surface’s paint sitting on top of yours — and transfer can compound off for the cost of a detail, with a $200–$500 spot repair covering a contained scratch underneath. The fingernail test sorts it in seconds: glides over = likely transfer or clear-coat, catches = cut paint, and the written estimate prices exactly which panels crossed which line. Get a Free Written Estimate By [Shah Jiwani](https://dgcollision.com/about/shah-jiwani/) · Owner, DG Collision Center Updated October 2, 2026 4 min read I-CAR Gold Class · PPG Certified The Longer Answer ## WHY A THREE-FOOT SCRAPE ISN’T PRICED BY THE FOOT — IT’S PRICED BY THE PANEL A side scrape is bodywork’s most deceptive injury, in both directions. The garage-pillar swipe that looks catastrophic is often mostly transfer — white garage paint or black rubber riding on top of your clear coat — and compounds away to reveal a scratch a fraction of the apparent size. Meanwhile a “small” scrape that crossed a panel gap quietly doubled its own price, because refinish work is priced per panel: paint can’t stop mid-panel without a visible edge, so every panel the scrape touched gets refinished whole, and on metallics the color then blends into the next untouched panel so the repair disappears. That’s the whole pricing logic: a scrape contained to one door is the $500–$1,500 row; the classic fender-door-quarter swipe is the $1,200–$2,500 multi-panel lane; and gouges that creased metal or tore a molding move the affected panel into the $1,500–$3,800 repair lane. The top of the ladder is the true side swipe — damage riding the whole side of the car, fender to quarter: metal repair along the length plus a full-side repaint stacks those lanes, and those jobs commonly run $5,000 and up, priced panel by panel on the written estimate. The depth ladder from [the scratch answer](https://dgcollision.com/answers/how-much-does-scratch-repair-cost/) applies panel by panel — fingernail glides: polish territory; catches: refinish; bare metal showing: refinish soon, because Texas humidity starts rust in weeks. Side scrapes add their own line items an honest estimate names: door handles, moldings, and badges get removed for a proper refinish (that’s R&I, not padding) and scraped textured moldings get replaced rather than painted-over; mirror caps caught in the swipe are usually their own small part; and a scrape that caught the rocker panel below the doors earns a look underneath, since rockers are structural territory. The side of a car is also its most-seen surface — a blend done right is invisible at every angle; done cheap, it’s a stripe you notice from across the lot, which is why [the paint-match answer](https://dgcollision.com/answers/will-new-paint-match-the-rest-of-my-car/) matters double here. The money side follows the usual map with one twist. Scraped by someone — a sideswipe in traffic, a hit-and-run in a parking lot — and it’s their liability or [the hit-while-parked playbook](https://dgcollision.com/guides/car-hit-while-parked/). Scraped by your own garage, pole, or mailbox post, it’s a single-car collision claim — and here the panel math meets the deductible math: a one-panel scrape near $500–$1,500 against a $500 deductible is [cash arithmetic](https://dgcollision.com/guides/file-claim-or-pay-out-of-pocket/), while a three-panel swipe usually justifies the claim comfortably. Either way, don’t pre-decide from the driveway: the transfer-versus-damage question alone can move the number by a factor of five, and the written answer is free. Related Questions ## ASKED ALONGSIDE THIS ONE The scrape is white paint from my garage. Will it buff out? + A: There’s a real chance — transfer sits on top of your clear coat, and compounding removes it without touching your paint. What’s underneath decides the rest: often it’s light clear-coat scuffing (polish), sometimes a true scratch (spot repair or panel). We’ll compound a test section at the estimate so the answer is demonstrated, not guessed — and if the whole thing wipes off, that’s the estimate: almost nothing. Why does crossing a panel gap change the price so much? + A: Because paint is finished per panel — a repair can’t fade out mid-door without leaving a visible edge, so the unit of work is the panel, not the scratch. One long scrape across door and quarter means two full refinishes plus the blend logic, where the same inches confined to one door is a single-panel job. It’s the least intuitive rule in body pricing and the most common quote surprise. Should I claim a garage scrape on my insurance? + A: Run the arithmetic with the real number first: a single-panel scrape near your deductible claims almost nothing and books a claim record for the privilege; a multi-panel swipe into the $2,000+ territory usually earns its claim. Hitting your own garage is a collision claim (your coverage, your deductible) — and the free written estimate is precisely the number that decision needs. The plastic trim strip took most of it. Cheaper or pricier? + A: Usually cheaper — that strip did its job. Scraped textured moldings generally get replaced rather than refinished (painting texture never looks right), and a molding part plus R&I often beats panel paint handily. If the molding absorbed the swipe and the paint behind it survived, you may be in the cheapest version of this whole page. Go Deeper [The scratch depth ladder](https://dgcollision.com/answers/how-much-does-scratch-repair-cost/) · [All paint pricing](https://dgcollision.com/answers/how-much-does-car-paint-repair-cost/) · [Hit while parked](https://dgcollision.com/guides/car-hit-while-parked/) · [All quick answers](https://dgcollision.com/answers/)